Marshalls Drivesys Driveway Maghull

Here we were transforming a driveway in the Maghull area of Sefton. First of all, we were excavating the ground to the required depth and removing all of the waste from the site. Then we installed a geotextile membrane over the ground to prevent any aggregate migration. The next stage was to install sufficient foundations for the driveway using MOT Type 1.

Before we could install the Drivesys block paving we had to install Drivesett kerbs to create a raised edge that would retain the driveway. Next, we installed a linear slot drain and then proceed with installing the Marshalls Drivesys Driveway System to the drive.